The innovation engine of Pulse Technologies, our state-of-the-art, fully equipped metallurgy and metrology lab is where we ask the big questions that lead to even bigger breakthroughs.
Designed for expeditionary land- and sea-based operations and equipped for simultaneous day/night full-motion video, communications relay, signals intelligence and a customer-selected payload in a single flight, Textron Systems' Aerosonde Small Unmanned Aircraft System (SUAS) delivers reliable, multi-mission performance in a class by itself. It is field-proven with more than 500,000 flight hours, including desert heat and Arctic cold.
Expeditionary land- or sea- based operations
Powered by Lycoming® EL-005 heavy-fuel engine for benchmark-setting reliability
Covert operation, with negligible visual and auditory signature
Multi-intelligence (multi-INT) payloads, i.e., electronic warfare (EW) and communications relay, in a single flight
WINGSPAN 12.0 ft (3.7 m)
RANGE 140 km (75 nm)
ENGINE Lycoming EL-005 heavy-fuel engine
Full-motion video (FMV) and day/night imaging
Voice communications relay
Ad-hoc networking (MANET)
Synthetic aperture radar (SAR)
EW
Signals intelligence (SIGINT)
Communications intelligence (COMINT)
3D mapping
Automatic identification systems (AIS)
Aerosonde® Fixed Wing | Aerosonde® HQ | |
---|---|---|
Payload | Up to 20 lbs (9.1 kg) up to 200 W | 15 lbs |
Max Wingspan | 12.0 ft (3.7 m) | 12.0 ft (3.7 m) |
Ceiling | 15,000 ft (4,572 m) | 10,000 ft |
Range | 140 km (75 nm) | 140 km (75 nm) |
Max Takeoff Elevation | 8,000 ft (2,438 m) | 7,000 ft |
UHF-, L-, S- and C-Band Capability | Yes | Yes |
Weight | 80 lbs (36.4 kg) | 105 lb |
Endurance | 14+ hr | 8 hrs (with 10 lb payload) |
Automated Launch and Recovery | A single system with hydraulic pneumatic launcher and net recovery | Vertical-takeoff-and-landing (VTOL) capability |
Airspeed | 45-65 kt | 45-65 kt |
Transition Altitude | N/A | 50-150 ft above ground level |
Lycoming’s EL-005 is optimized for jet fuels and uses digital electronic controls to create a seamless flying experience.
Single-cylinder, air-cooled, direct-drive, spark-ignited two-stroke engine controlled by the Electronic Control Unit.
Produces 4 HP @ 5,500 RPM and has a dry weight of 13.8 lbs (6.25 kg).
Over 170,000 fielded flight hours of maturity on the Aerosonde SUAS.
The innovation engine of Pulse Technologies, our state-of-the-art, fully equipped metallurgy and metrology lab is where we ask the big questions that lead to even bigger breakthroughs.
Your Source for Custom, American Made Precision Miniature Electro-Magnetic Clutches, Brakes, Solenoids, and Torque Indicators.
FTM Series is designed and produced for 'Heavy Loads' between 120 kg and 300 kg. With its Carbon Composite body, it is robust and long-lasting in all conditions.
Heating of transit sheds, workshops and warehouses.
Turbo Cast (India) Pvt. Ltd. is India's First Indigenous Investment Casting foundry, started in 2015, especially for Aerospace, Defense, Medical & Aluminum Alloy, Accredited for AS9100D & Nadcap (NDT) & Nadcap (Welding) Certification.
Renown Desert Aircraft piston engines combined with the leading edge fuel injection system by INFInject provide amazing reliability in all conditions and deficient fuel consumption.
As aluminium "rusts" it produces a loose dry white powder, aluminium oxide. The anodising process artificially produces this film but as a hard, dense wear resistant surface.
The Shadin Avionics F/ADC-2000 Fuel/Airdata Computer gives you access to more real-time flight information than ever before.
Within the scope of the system, two basic monitoring and management subsystems have been developed and these subsystems form an important infrastructure for the efficient use of smart city applications.
AMD is an approved supplier for Offset from the Department of Industrial Policy Promotion (DIPP) under the aid of the Indian Ministry of Defence.
AVP supportscustomers worldwide on testing and repairing Autopilots and acceleration sensors for the C-130H and SA-330 Puma and SA-332 Super Puma.
Menatek’s premium quality inventory is ready to provide and support various MRO programs. We focus on full life cycle support and we reserve smart stocks and spares.
ADER DEFENCE A.Ş. is the result of the collaboration of a team of experts in order to improve the industrial and high-tech manufacturing capabilities of Turkey.
Our reputation as a supplier of innovative electronic solutions has resulted in our products being used in various land, sea and air applications for over 20 years.
We carry a complete portfolio of solutions that is making rapid head way into various industries such as manufacturing, medical, jewellery, aerospace and dental markets.
We are an Innovation and Technology Centre highly specialized in materials and in advanced manufacturing technologies, especially joining technologies and laser technologies applied to materials processing, robotics, and automation.
Poweration, Inc. is a leading supplier of power electronics equipment focusing mainly on R&D, design, and manufacturing with a wide variety of products for harsh-environment power electronics equipment.
More than 30 years of international experience in the areas of sales, marketing, communication, modern brand management and business development.
Our company, which carries out all heat treatment operations under one roof.
CSM Industry is a manufacturer of MULTI-PURPOSE TELESCOPIC EXCAVATOR for the defense sector.
We are pleased to Introduce BNR EXPORTS as a 100% EOU established in the year 2000 Manufacturing precision machined and turned components.
Koç Bilgi ve Savunma Teknolojileri A.Ş. was established in 2006 in order to meet the defense industry needs of our country with indigenous solutions and to provide added value to the defense sector.
We produce to the highest standards, fully aware of our responsibilities as a company working proudly under the umbrella of a holding, with a history going back 71 years. Today, we are among the leading integrated solution partners in the industry.
RCF Technologies, founded in 1975, is a woman owned, Hubzone certified company, designing and manufacturing components for industries including aerospace, automotive, marine, defense and industrial.