List with Us Sign In

Listings in AS 9100 QMS, Cybersecurity, Aerial Systems and Acoustic Power Sources & Devices

Showing 12 of 75 results
Categories
AS 9100 QMS 58
Defence 22
Aerial Systems 11
Ammunition Technology 7
Ground Systems 14
Naval Systems 8
Defense Underpinning Technologies 56
Electronic & Electrical Device Technology 12
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 3
Device Integration & Reliability 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 3
Other Electrical Power Sources & Devices 4
RF Power Sources & Devices 3
Chemical & Biological Materials 6
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 5
Computing Technology 10
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 2
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 6
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 4
Information & Signal Processing 14
Data & Information Management Technology 5
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 10
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 7
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 2
Acoustic Propagation in Air & Water 1
Meteorology 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 24
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 7
Surface Protection Technologies 5
Industry 4.0 23
Cybersecurity 9
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Industrial Internet of Things (IIoT) 8
Simulation 3
The Cloud Computing 3
Academia / Cluster / Association 1
Aerospace 66
Aerospace Materials 20
Aerospace Power Plants and Related Equipments 7
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 9
Aircraft Engines 8
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 5
Maintenance Repair and Operations (MRO) 12
Onboard Equipment Systems 4
Production Equipment and Software 8
Unmanned Vehicle Aircraft (UAV, Drone) 20
Aviation (ATA 100 Chapters) 49
(Airborne) Auxiliary Power Unit (APU) 1
Accessory Gear Box (Engine Driven) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 4
Communication 7
Electrical - Electronic Panels Components 5
Electrical Power 4
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 3
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 4
Lights 1
Main Rotor Drive(S) 3
Main Rotor(S) 4
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 3
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Wings 1
Defense Products 59
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 6
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 2
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 36
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 6
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 3
Space Launchers 3
Surveillance and Navigation Satellites 5
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 16
Weapons 18
Directed Energy Weapons 5
Gun Systems - Hand Held 10
Gun Systems - Platform Mounted 11
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Defense Technologies 75
Communications & CIS 15
Air Traffic Control Systems 2
Command & Information Systems Integration 3
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Communications systems-micro-and millimetre wave 1
Infrastructure to Support Information Management 1
Network Management Systems 4
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 21
Acoustic Designs 2
Aerodynamic Designs 3
Ballistic Designs 7
Electrical / Electronic Designs 5
Hydrodynamic Designs 1
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 4
Thermal / Cryogenic Designs 2
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 7
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 4
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 5
Integrated Systems 17
Health Monitoring Systems 2
Integrated System Testing and Evaluation 4
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 5
System Repair Technologies 3
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 13
Armour systems 7
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Manufacturing Processing / Design Tools 21
Advanced Prototyping 9
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 5
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 6
Techniques and Systems for Production Manufact. 6
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 10
Electrical Propulsion - rotary & linear 3
Final Drive - Wheels and Tracks 1
Gas Turbines 5
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 4
Transmissions and Powertrains 3
Sensor Systems 9
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Distributor 27
Education and Training 20
Events Organizer 1
Expert 10
Maintenance & Repair 14
Manufacturer 126
Media 32
Service Provider 144
Legal 93
Service Providers 12
Space 17
Supplier 34
Unmanned Vehicles & Platforms 26
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 2
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 3
Propulsion 2
Transport Vehicles 2
Vehicle Command and Control 2
Locations
Australia 2
QLD 1
Brasil 1
Canada 1
Ontario 1
Czech Republic 1
France 3
Germany 3
India 13
Gujarat 4
Karnataka 1
Maharashtra 1
Indonesia 1
Ireland 1
Israel 1
Italy 2
Lithuania 1
Malaysia 1
Mexico 2
Pakistan 1
Poland 1
Portugal 1
Singapore 2
South Korea 1
Spain 3
Switzerland 3
Thailand 1
Turkey 11
Ankara 5
Istanbul 2
United Kingdom 5
United States 25
Alabama 1
California 6
Florida 1
Illinois 2
Maryland 1
Massachusetts 2
Minnesota 1
Missouri 1
Nevada 1
New York 2
Oklahoma 1
Pennsylvania 3
South Dakota 1
Texas 1
Utah 1
Virginia 1
Washington 1
Wyoming 1
Bhansali Trade IMpex
+91 98455 89999
Write a review
Bhansali Trade IMpex
in AS 9100 QMS Aerospace Materials
Bhansali Trade Impex, #143-145, Earth Castle Mall, #101-104, 1st, Floor, V. P. Road, Girgaum, Mumbai 400004, India
We are a Leading Supplier of Ferrous & Non-Ferrous Metals in India.
+91 98455 89999
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review
Advance Die-Casting Industry Co., Ltd.
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
Enlivening Technologies Pvt. Ltd.
9780116700
Write a review
Enlivening Technologies Pvt. Ltd.
in Mechanical Designs Ballistic Designs Fortifications/Defences Battlefield Engineering Manufacturer
(+1)
AS 9100 QMS
MARATHAHALLI BANGALORE , Karnataka 560067, India
To develop world-class solutions to unique problems and deliver quality one-stop solutions in the aerospace, automotive and defense industry.
9780116700
Protonautics Pty Ltd
+61400433710
Write a review
Protonautics Pty Ltd
in Standard Practices And Structures - General Manufacturer AS 9100 QMS Space
23 Westgate St, Wacol, QLD 4076, Australia
Protonautics is an AS9100:D certified manufacturer of components for Aerospace and Defence clients. Our certification scope include machined components, chemical surface treatments and assembly services.
+61400433710
Miniature & Specialty Ball Bearings - Made in USA
518-283-8002
Write a review
Miniature & Specialty Ball Bearings - Made in USA
in Lean Manufacturing Manufacturer AS 9100 QMS I. Unmanned Aerial Vehicles
145 Jordan Road, New York 12180, United States
Pacamor Kubar Bearings (PKB) is an industry leader in the manufacturing & development of precision and miniature ball bearings. 
518-283-8002
D&E Machining Ltd.
18146643531
Write a review
D&E Machining Ltd.
in Undersea Platforms Fighting Land Vehicles Helicopters Space Launchers Fighting Sea Surface Platforms
(+15)
Missiles - Anti Air Missiles - Anti Surface (Sea) Missiles - Anti Ground (Land) Torpedoes - Anti Submarine Drone Manufacturer Supplier AS 9100 QMS Space Aerial Systems Ground Systems Naval Systems Aircraft Construction, Assembly and Sub-assembly Aircraft Engines Unmanned Vehicles & Platforms
150 Industrial Drive Corry, Pennsylvania 16407, United States
We provide comprehensive component manufacturing services in-house as well as through our group of tightly controlled secondary service partners.
18146643531
Chemtron Pte Ltd.
+6591055786
Write a review
Chemtron Pte Ltd.
in Concepts & Product Definition Distributor 3D Printing Aerial Systems Ground Systems
(+3)
Naval Systems Ammunition Technology Maintenance Repair and Operations (MRO)
blk 203A henderson road,henderson industrial park, #02-03 159546, Singapore
We carry a complete portfolio of solutions that is making rapid head way into various industries such as manufacturing, medical, jewellery, aerospace and dental markets.
+6591055786
DMD Solutions
+34666737318
Write a review
DMD Solutions
in Reliability and Maintainability of Systems Safety systems Design for Improved Reliability & Maintainability Service Provider Supplier
(+6)
Education and Training Aerial Systems Aerospace Power Plants and Related Equipments Maintenance Repair and Operations (MRO) Onboard Equipment Systems Unmanned Vehicle Aircraft (UAV, Drone)
Carrer Àlaba 140 Barcelona, 5è 3era 08018, Spain
DMD Solutions provides engineering services in the fields of aerospace design & certification with a focus on Reliability, Availability, Maintainability, and Safety in the aerospace industry.
+34666737318
TİTRA
+903125141987
Write a review
TİTRA
in Manufacturer Aerial Systems Unmanned Vehicles & Platforms
Mustafa Kemal Mahallesi, Dumlupınar Bulvarı, ODTÜ Bilişim İnovasyon Merkezi, No:507 280/G Çankaya, Ankara 06510, Turkey
With the desire to support the national technology move of our country, we produce solutions and technology in the fields of unmanned systems, smart health, smart cities, artificial intelligence, big data and cyber security.
+903125141987
Cross & Associates Manufacturing Incorporated
6132263002
Write a review
Cross & Associates Manufacturing Incorporated
in Manufacturer AS 9100 QMS
39 Antares Drive, Ontario k2e7z1, Canada
Cross & Associates Manufacturing Inc. (CAM) is a precision machine shop located in Ottawa, ON, Canada serving the High Tech sectors including Aerospace, Defense, Telecommunications, Bio-medical, and Transportation. We are AS9100D as well as ISO 9001.
6132263002
Menatek Defense Technologies
+90 850 800 66 85
Write a review
Menatek Defense Technologies
in Mechanical / Hydraulic Technologies and Devices Lubrication Technology Thermal and Thermodynamic Technologies and Devices Battle Damage Reduction Techniques Armour systems
(+14)
Structural Designs Mechanical Designs Ballistic Designs Acoustic Designs System Repair Technologies Integrated System Testing and Evaluation Manufacturing Process Simulation Lean Manufacturing Process Control Technology Whole Life Cycle Improvement Manufacturer AS 9100 QMS Education and Training Maintenance & Repair
Esenşehir, Esenşehir Mah. Bostancı Yolu Cad, Haseki Sokağı No:22, Dudullu Osb/Ümraniye, Istanbul 34776, Turkey
Menatek is the leading high-tech manufacturer and the largest supply chain manager of Türkiye and the MENA Region on heavy to light military vehicles, all types of tactical & combat platforms and its wide range of strategic suppliers.
+90 850 800 66 85
Baker Manufacturing, Inc.
2538408610
Write a review
Baker Manufacturing, Inc.
in Manufacturer Supplier AS 9100 QMS Space Aerospace Materials
1640 Marine View Dr, Suite B, Washington 98422, United States
Baker Manufacturing is a third-generation, family-owned business that crafts high precision metal parts and tooling for the aerospace and maritime industries. The company is based in Washington, with a second location in Texas.
2538408610
1 2 3 4 5 …
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register