Listings in Communications systems-micro-and millimetre wave, Concurrent Engineering and Reduced Design Cycle, IS (International Security) and Business Process Simulation

Categories

Defense Products 59

Business Processes 8

Business Process Simulation 1

Benchmarking & Best Practice 1

Concepts & Product Definition 1

Procurement & Contracting Processes 3

Product Supportability 2

Research & Technology Management 3

Whole Life Cycle Improvement 1

Defence Policy and Functions - Support 5

IS (International Security) 2

Equipment Disposal & Enviromental Protection 1

Logistics 2

Battlespace Information 6

Command & Control 1

Digitization of the Battlespace 1

ISTAR (Intelligence, Surveillance, Target Acquisit 3

Information Warfare 1

Military Intelligence 2

Defence Analysis 2

Military Doctrine Analysis 1

Platform and System Concept Studies 1

Tactical Develop. and Supp. to Operation/Training 1

Equipped Personnel 3

Equipped Men 1

Training & Education 2

Installations 6

Battlefield Engineering 2

Fortifications/Defences 3

Ground Stations 2

T&E Facilities (Test and Evaluation Facilities) 1

Platforms 36

Combat Aircraft 8

Commercial Aircraft 4

Communications Satellites 6

Drone 13

Fighting Land Vehicles 10

Fighting Sea Surface Platforms 2

Helicopters 10

Lighter-than-Air Platforms 2

Logistic, Command and Surveillance Land Vehicles 9

Logistic, Support and Surveillance Aircraft 5

Other Satellites 3

Space Launchers 3

Surveillance and Navigation Satellites 5

Undersea Platforms 1

Unmanned Land, Sea, Air Vehicles 16

Weapons 18

Directed Energy Weapons 5

Gun Systems - Hand Held 10

Gun Systems - Platform Mounted 11

Mines - Land 3

Mines - Sea 3

Missiles - Anti Air 8

Missiles - Anti Ground (Land) 5

Missiles - Anti Surface (Sea) 7

Non-Lethal Weapons 2

Torpedoes - Anti Submarine 4

Torpedoes - Anti Surface 3

Defense Technologies 75

Communications & CIS 15

Communications systems-micro-and millimetre wave 1

Air Traffic Control Systems 2

Command & Information Systems Integration 3

Communications & CIS Security systems 3

Communications systems - Acoustic 2

Communications systems - IR / Visible / UV 1

Infrastructure to Support Information Management 1

Network Management Systems 4

Optimisation, Planning & Decision Support systems 2

Manufacturing Processing / Design Tools 21

Concurrent Engineering and Reduced Design Cycle 3

Advanced Prototyping 9

Cost Engineering 2

Design for Improved Reliability & Maintainability 5

Environmentally Friendly Factory Processes 4

Knowledge-based Engineering 4

Lean Manufacturing 10

Manufacturing Process Simulation 7

Process Control Technology 7

Project Management and Control 6

Techniques and Systems for Production Manufact. 6

Design Aspects - Platforms and Weapons 21

Acoustic Designs 2

Aerodynamic Designs 3

Ballistic Designs 7

Electrical / Electronic Designs 5

Hydrodynamic Designs 1

Mechanical Designs 8

Optical Designs 1

Stealth Designs 1

Structural Designs 4

Thermal / Cryogenic Designs 2

Electronic Warfare & DEW 8

DET - Other 1

DET - RF 2

DET -Lasers 1

ECM - Acoustic 1

ECM - RF 1

EOCM - IR / Visible / UV 1

EOPM - IR / Visible / UV 1

EPM - RF 2

ESM - Communications 5

ESM - Non-Communications 1

Guidance & Control Weapons and Platforms 7

Display systems 1

Navigation systems 3

Platform Guidance and Control systems 4

Stores and Weapons Release / Discharge systems 1

Weapon Guidance and Control systems 5

Integrated Systems 17

Health Monitoring Systems 2

Integrated System Testing and Evaluation 4

Middleware systems 1

Reliability and Maintainability of Systems 1

Robotics and Automated systems in Operational Sys. 3

Safety systems 5

System Repair Technologies 3

Systems Engineering and Integrated Systems Design 6

Lethality & Platform Protection 13

Armour systems 7

Battle Damage Reduction Techniques 1

Defensive Aids Suite systems 1

Explosive Ordnance Disposal 2

Mine Detection and Clearance 2

Other Platform Protection Measures 1

Penetrators 2

Warheads 2

Personnel Protection Measures 2

CB & N Protection Systems - Physical 1

Physical Protection Systems - Environment 1

Physical Protection Systems - Threat 2

Propulsion and Powerplants 10

Electrical Propulsion - rotary & linear 3

Final Drive - Wheels and Tracks 1

Gas Turbines 5

Gun and Launch Tube Propulsion 1

Rocket Engines and Ramjets 4

Transmissions and Powertrains 3

Sensor Systems 9

Acoustic Sensors - Active 1

Electrical & Electrochemical Sensors 1

Environmental Monitoring Systems 2

Explosive Detection Sensors 1

IR Sensors - Active 5

IR Sensors - Passive 5

Magnetic Sensors 1

Motion Sensor systems 1

RF Sensors / Antennas - Active 2

RF Sensors / Antennas -Passive 2

Visible / UV Wave Sensors 1

Signature Control & Reduction 2

Electrical and Electrochemical Signatures 1

Radar Signatures 1

Simulators, Trainers and Synthetic Environment 8

Command & Staff Training Systems 1

Skills Training Systems 3

Tactical / Crew Training systems 4

Virtual Reality 3

AS 9100 QMS 58

Academia / Cluster / Association 1

Aerospace 66

Aerospace Materials 20

Aerospace Power Plants and Related Equipments 7

Aerospace Sensors 8

Air Traffic Control 2

Aircraft Construction, Assembly and Sub-assembly 9

Aircraft Engines 8

Airport Equipments and Services 2

Cabin and Seat Layouts 3

Cargo and Logistics 5

Maintenance Repair and Operations (MRO) 12

Onboard Equipment Systems 4

Production Equipment and Software 8

Unmanned Vehicle Aircraft (UAV, Drone) 20

Aviation (ATA 100 Chapters) 49

(Airborne) Auxiliary Power Unit (APU) 1

Accessory Gear Box (Engine Driven) 1

Air Conditioning 2

Auto Flight 2

Bleed Air 1

Cabin Systems 4

Communication 7

Electrical - Electronic Panels Components 5

Electrical Power 4

Electrical Power Multiplexing 1

Electronic Warfare System 2

Engine 4

Engine - Fuel and Control 1

Engine Controls 3

Engine Indicating 1

Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3

Equipment /Furnishings 2

Fire Protection 3

Flight Controls 3

Folding Blades/Pylon 1

Fuel 1

Fuselage 3

Hydraulic Power 1

Ice And Rain Protection 2

In-Flight Fuel Dispensing 1

Indicating / Recording System 1

Inert Gas System 1

Information Systems 1

Integrated Modular Avionics 4

Landing Gear 4

Lights 1

Main Rotor Drive(S) 3

Main Rotor(S) 4

Missiles, Drones, and Telemetry 8

Multisystem 1

Nacelles/Pylons 2

Navigation 4

Oil 1

Onboard Maintenance Systems 1

Oxygen 1

Pneumatic 2

Power Plant 3

Rotors Flight Control 2

Stabilizers 3

Standard Practices And Structures - General 1

Surveillance 4

Tail Rotor 3

Tail Rotor Drive 2

Vacuum 1

Weapon System 3

Wings 1

Defence 22

Aerial Systems 11

Ammunition Technology 7

Ground Systems 14

Naval Systems 8

Defense Underpinning Technologies 56

Chemical & Biological Materials 6

Biological Agent Defence, Precursors 1

Chemical Agent Defence, Precursors 1

Medical Products and Materials 5

Computing Technology 10

Architectures 1

Encryption/ Crypto Technology 3

High Integrity & Safety Critical Computing 2

Mathematical Modelling Development 4

OA Tools and Techniques 1

Protocol Technology 2

Secure Computing Techniques 1

Software Engineering 5

Software Verification and Accreditation Techniques 4

Electronic & Electrical Device Technology 12

Acoustic Power Sources & Devices 1

Device Concepts & Fabrication 3

Device Integration & Reliability 2

Electric Motors 2

Electrical Batteries 2

Inertial/Gravitational Devices 3

Other Electrical Power Sources & Devices 4

RF Power Sources & Devices 3

Electronic Materials 4

Insulating and Dielectric Materials 2

Magnetic Materials 1

Silicon-based Materials 3

Superconducting Materials 1

Energetic Materials and Plasma Technology 2

Explosives 2

Propellants 2

Pyrotechnics 1

Human Sciences 6

Human Performance Enhancement 1

Human Survivability, Protection & Stress Effects 2

Human-Factors Integration 1

Military Human Resources 4

Information & Signal Processing 14

Data & Information Management Technology 5

Digital Signal Processing Technology 4

Image/Pattern Processing Technology 6

Information and Data Fusion Technology 4

Modelling and Simulation Technology 3

Optical Signal Processing Technology 2

Optimisation & Decision Support Technology 2

Speech & Natural Language Processing Technology 2

Mechanical, Thermal and Fluid-Related Technologies 10

Fluid Dynamics Techniques 1

Fluid Mechanics-Phenomenological and Experimental 1

Lubrication Technology 2

Mechanical / Hydraulic Technologies and Devices 7

Thermal and Thermodynamic Technologies and Devices 4

Operating Environments 2

Acoustic Propagation in Air & Water 1

Meteorology 1

Photonic/Optical Materials & Device 3

Display Materials & Devices 2

IR/Visible/UV Detector Materials & Devices 1

Lasers (All Types) 1

Non-Laser Devices 1

Optical Materials & Devices 2

Transparent Materials 1

Signature Related Materials 6

Acoustic & Vibration Absorbing Materials 4

Radar Absorbing Materials & Coatings 3

Structural Materials 24

Ceramics, Ceramic Matrix Composite and Glass 2

Corrosion and Wear Control Technology 3

Forming 10

Joining Technology 4

Life Extension of Structural Materials 2

Materials Removal 2

Metals and Metal Matrix Composite 13

Polymers and Polymer Matrix Composite 3

Smart/Functional Materials for Structural Uses 1

Structural Mechanics 7

Surface Protection Technologies 5

Distributor 27

Education and Training 20

Events Organizer 1

Expert 10

Industry 4.0 23

3D Printing 4

Augmented Reality 1

Autonomous Robots 1

Big Data and Analytics 4

Cybersecurity 9

Industrial Internet of Things (IIoT) 8

Simulation 3

The Cloud Computing 3

Maintenance & Repair 14

Manufacturer 126

Media 32

Service Provider 144

Legal 93

Service Providers 12

Space 17

Supplier 34

Unmanned Vehicles & Platforms 26

Command and Control Subsystem 1

Data Display and Controls 1

Electrical Subsystem 1

Fire Control 1

I. Autonomous Surface Vehicles 2

I. Unmanned Aerial Systems 1

I. Unmanned Aerial Vehicles 2

I. Unmanned Ground Vehicles 1

I. Unmanned Maritime System 1

I. Unmanned Maritime Vehicle 1

Mission Computer, Processing 1

Navigation, Guidance 3

Propulsion 2

Transport Vehicles 2

Vehicle Command and Control 2

+971559869752

Write a review

Advanced Armour Engineering

T5 - 25 Sharjah Airport International Freezone, Sharjah, United Arab Emirates

Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.

+971559869752

+614 7854 3434

Write a review

DroneSec

in Tactical Develop. and Supp. to Operation/Training Military Doctrine Analysis Training & Education IS (International Security) Information Warfare

276 Flinders St, Melbourne Australia VIC 3000, Australia

DroneSec is a cyber-security and threat intelligence firm for drones.

+614 7854 3434

+919823037009

Write a review

Sandeep Metal Craft Pvt. Ltd

in Penetrators Mines - Land Missiles - Anti Air Missiles - Anti Surface (Sea) Gun Systems - Platform Mounted

D-16 M.I.D.C INDUSTRIAL AREA HINGNA, Maharashtra 440016, India

Established with an aim to offer the best, Sandeep Metalcraft Private Limited (SMPL) is one of the leading names in the field of Precision Manufacturing and Assembly.

+919823037009

+12677330200

Write a review

Pulse Technologies

in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control

2000 AM Drive Quakertown, Pennsylvania 18951, United States

As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.

+12677330200

Write a review

NewIPNow

in Communications & CIS Security systems IS (International Security) Industrial Internet of Things (IIoT) Cybersecurity

7260 W Azure Dr, Las Vegas, Nevada 89130, United States

Private proxies seller since 2013. Competitive advantage: Cheapest proxies in the market + self-service

+905324659048

Write a review

Nümerik Makina Mühendislik Döküm

in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.

Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey

Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.

+905324659048

+90 216 540 72 57

Pals Electronics A.S.

in Device Concepts & Fabrication Device Integration & Reliability RF Power Sources & Devices Software Engineering Integrated System Testing and Evaluation

Dudullu OSB, 1. Cadde 18/1 Umraniye / ISTANBUL, Istanbul 34775, Turkey

PALS is a manufacturer of satellite and broadcast products and turnkey systems integrator in Istanbul since 1995.

+90 216 540 72 57

Listings in Communications systems-micro-and millimetre wave, Concurrent Engineering and Reduced Design Cycle, IS (International Security) and Business Process Simulation

Download our app to your mobile phone