United States

Categories

Defense Technologies 16

Manufacturing Processing / Design Tools 5

Lean Manufacturing 3

Advanced Prototyping 3

Concurrent Engineering and Reduced Design Cycle 1

Cost Engineering 1

Environmentally Friendly Factory Processes 1

Knowledge-based Engineering 1

Manufacturing Process Simulation 1

Process Control Technology 1

Project Management and Control 1

Techniques and Systems for Production Manufact. 2

Communications & CIS 4

Communications & CIS Security systems 1

Communications systems - Acoustic 2

Network Management Systems 1

Design Aspects - Platforms and Weapons 4

Acoustic Designs 1

Aerodynamic Designs 1

Electrical / Electronic Designs 2

Optical Designs 1

Electronic Warfare & DEW 1

DET - RF 1

ECM - Acoustic 1

ECM - RF 1

EPM - RF 1

Guidance & Control Weapons and Platforms 3

Display systems 1

Navigation systems 2

Platform Guidance and Control systems 1

Weapon Guidance and Control systems 1

Integrated Systems 3

Health Monitoring Systems 2

Integrated System Testing and Evaluation 1

Robotics and Automated systems in Operational Sys. 1

System Repair Technologies 1

Systems Engineering and Integrated Systems Design 1

Lethality & Platform Protection 2

Armour systems 1

Penetrators 1

Warheads 1

Propulsion and Powerplants 1

Gun and Launch Tube Propulsion 1

Sensor Systems 4

Acoustic Sensors - Active 1

Environmental Monitoring Systems 1

Explosive Detection Sensors 1

IR Sensors - Active 3

IR Sensors - Passive 2

RF Sensors / Antennas - Active 2

RF Sensors / Antennas -Passive 2

Signature Control & Reduction 2

Electrical and Electrochemical Signatures 1

Radar Signatures 1

Simulators, Trainers and Synthetic Environment 1

Virtual Reality 1

Defense Underpinning Technologies 13

Information & Signal Processing 4

Data & Information Management Technology 1

Digital Signal Processing Technology 1

Image/Pattern Processing Technology 1

Modelling and Simulation Technology 1

Chemical & Biological Materials 2

Medical Products and Materials 2

Computing Technology 4

High Integrity & Safety Critical Computing 2

Mathematical Modelling Development 2

Protocol Technology 1

Software Engineering 1

Software Verification and Accreditation Techniques 1

Electronic & Electrical Device Technology 3

Acoustic Power Sources & Devices 1

Electric Motors 1

Electrical Batteries 1

Inertial/Gravitational Devices 1

Other Electrical Power Sources & Devices 1

RF Power Sources & Devices 1

Electronic Materials 2

Insulating and Dielectric Materials 1

Silicon-based Materials 2

Mechanical, Thermal and Fluid-Related Technologies 2

Fluid Mechanics-Phenomenological and Experimental 1

Mechanical / Hydraulic Technologies and Devices 1

Thermal and Thermodynamic Technologies and Devices 2

Operating Environments 1

Acoustic Propagation in Air & Water 1

Photonic/Optical Materials & Device 1

Display Materials & Devices 1

Optical Materials & Devices 1

Signature Related Materials 2

Acoustic & Vibration Absorbing Materials 2

Structural Materials 2

Corrosion and Wear Control Technology 1

Forming 1

Metals and Metal Matrix Composite 1

Surface Protection Technologies 1

AS 9100 QMS 18

Aerospace 20

Aerospace Materials 2

Aerospace Power Plants and Related Equipments 2

Aerospace Sensors 1

Air Traffic Control 1

Aircraft Construction, Assembly and Sub-assembly 1

Aircraft Engines 3

Cargo and Logistics 4

Maintenance Repair and Operations (MRO) 4

Onboard Equipment Systems 1

Production Equipment and Software 2

Unmanned Vehicle Aircraft (UAV, Drone) 6

Aviation (ATA 100 Chapters) 14

(Airborne) Auxiliary Power Unit (APU) 1

Auto Flight 1

Cabin Systems 1

Communication 1

Electrical - Electronic Panels Components 1

Electrical Power 1

Engine 2

Engine Controls 1

Fire Protection 2

Flight Controls 1

Folding Blades/Pylon 1

Fuselage 1

Indicating / Recording System 1

Integrated Modular Avionics 1

Landing Gear 3

Main Rotor Drive(S) 1

Main Rotor(S) 2

Missiles, Drones, and Telemetry 3

Nacelles/Pylons 2

Oil 1

Power Plant 1

Rotors Flight Control 1

Stabilizers 1

Tail Rotor 2

Tail Rotor Drive 1

Weapon System 1

Defence 4

Aerial Systems 1

Ground Systems 4

Naval Systems 2

Defense Products 16

Battlespace Information 1

ISTAR (Intelligence, Surveillance, Target Acquisit 1

Business Processes 1

Research & Technology Management 1

Defence Policy and Functions - Support 1

IS (International Security) 1

Platforms 9

Combat Aircraft 3

Commercial Aircraft 2

Communications Satellites 1

Drone 4

Fighting Land Vehicles 4

Fighting Sea Surface Platforms 2

Helicopters 3

Lighter-than-Air Platforms 1

Logistic, Command and Surveillance Land Vehicles 2

Logistic, Support and Surveillance Aircraft 1

Space Launchers 3

Surveillance and Navigation Satellites 1

Undersea Platforms 1

Unmanned Land, Sea, Air Vehicles 6

Weapons 9

Directed Energy Weapons 1

Gun Systems - Hand Held 4

Gun Systems - Platform Mounted 5

Missiles - Anti Air 3

Missiles - Anti Ground (Land) 2

Missiles - Anti Surface (Sea) 3

Torpedoes - Anti Submarine 1

Distributor 8

Education and Training 3

Expert 2

Industry 4.0 10

3D Printing 1

Augmented Reality 1

Big Data and Analytics 2

Cybersecurity 6

Industrial Internet of Things (IIoT) 5

Simulation 1

The Cloud Computing 1

Maintenance & Repair 5

Manufacturer 34

Media 6

Service Provider 98

Legal 82

Service Providers 5

Space 4

Supplier 15

Unmanned Vehicles & Platforms 9

Command and Control Subsystem 1

Data Display and Controls 1

Electrical Subsystem 1

I. Unmanned Aerial Systems 1

I. Unmanned Aerial Vehicles 2

I. Unmanned Ground Vehicles 1

I. Unmanned Maritime System 1

I. Unmanned Maritime Vehicle 1

Mission Computer, Processing 1

Navigation, Guidance 1

Propulsion 1

Vehicle Command and Control 2

+12677330200

Write a review

Pulse Technologies

2000 AM Drive Quakertown, Pennsylvania 18951, United States

As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.

+12677330200

+18014877455

Write a review

BEMSCO INC.

in Warheads Penetrators Gun and Launch Tube Propulsion Advanced Prototyping Techniques and Systems for Production Manufact.

Bemsco Inc, 400 West, Salt Lake City, Utah 84101, United States

Bemsco is a privately held small business that has been manufacturing products for the DOD and commercial sources for over 50 years.

+18014877455

Miniature & Specialty Ball Bearings - Made in USA

518-283-8002

Write a review

Miniature & Specialty Ball Bearings - Made in USA

in Lean Manufacturing Manufacturer AS 9100 QMS I. Unmanned Aerial Vehicles

145 Jordan Road, New York 12180, United States

Pacamor Kubar Bearings (PKB) is an industry leader in the manufacturing & development of precision and miniature ball bearings.

518-283-8002

Colvin Run Networks

in Data & Information Management Technology

WeWork, Virginia 22102, United States

Colvin Run Networks is an applied data science company that leverages best of breed commercial and open- source tools for mission-critical capabilities in cloud analytics, machine learning, and blockchain applications.

Listings in Lean Manufacturing and Data & Information Management Technology in United States

Download our app to your mobile phone