List with Us Sign In

Listings in Manufacturing Processing / Design Tools, Space and Aerospace Sensors in United States

Showing 10 of 10 results
Categories
Space 4
Aerospace 20
Aerospace Sensors 1
Aerospace Materials 2
Aerospace Power Plants and Related Equipments 2
Air Traffic Control 1
Aircraft Construction, Assembly and Sub-assembly 1
Aircraft Engines 3
Cargo and Logistics 4
Maintenance Repair and Operations (MRO) 4
Onboard Equipment Systems 1
Production Equipment and Software 2
Unmanned Vehicle Aircraft (UAV, Drone) 6
Defense Technologies 16
Manufacturing Processing / Design Tools 5
Advanced Prototyping 3
Concurrent Engineering and Reduced Design Cycle 1
Cost Engineering 1
Environmentally Friendly Factory Processes 1
Knowledge-based Engineering 1
Lean Manufacturing 3
Manufacturing Process Simulation 1
Process Control Technology 1
Project Management and Control 1
Techniques and Systems for Production Manufact. 2
Communications & CIS 4
Communications & CIS Security systems 1
Communications systems - Acoustic 2
Network Management Systems 1
Design Aspects - Platforms and Weapons 4
Acoustic Designs 1
Aerodynamic Designs 1
Electrical / Electronic Designs 2
Optical Designs 1
Electronic Warfare & DEW 1
DET - RF 1
ECM - Acoustic 1
ECM - RF 1
EPM - RF 1
Guidance & Control Weapons and Platforms 3
Display systems 1
Navigation systems 2
Platform Guidance and Control systems 1
Weapon Guidance and Control systems 1
Integrated Systems 3
Health Monitoring Systems 2
Integrated System Testing and Evaluation 1
Robotics and Automated systems in Operational Sys. 1
System Repair Technologies 1
Systems Engineering and Integrated Systems Design 1
Lethality & Platform Protection 2
Armour systems 1
Penetrators 1
Warheads 1
Propulsion and Powerplants 1
Gun and Launch Tube Propulsion 1
Sensor Systems 4
Acoustic Sensors - Active 1
Environmental Monitoring Systems 1
Explosive Detection Sensors 1
IR Sensors - Active 3
IR Sensors - Passive 2
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 1
Virtual Reality 1
AS 9100 QMS 18
Aviation (ATA 100 Chapters) 14
(Airborne) Auxiliary Power Unit (APU) 1
Auto Flight 1
Cabin Systems 1
Communication 1
Electrical - Electronic Panels Components 1
Electrical Power 1
Engine 2
Engine Controls 1
Fire Protection 2
Flight Controls 1
Folding Blades/Pylon 1
Fuselage 1
Indicating / Recording System 1
Integrated Modular Avionics 1
Landing Gear 3
Main Rotor Drive(S) 1
Main Rotor(S) 2
Missiles, Drones, and Telemetry 3
Nacelles/Pylons 2
Oil 1
Power Plant 1
Rotors Flight Control 1
Stabilizers 1
Tail Rotor 2
Tail Rotor Drive 1
Weapon System 1
Defence 4
Aerial Systems 1
Ground Systems 4
Naval Systems 2
Defense Products 16
Battlespace Information 1
ISTAR (Intelligence, Surveillance, Target Acquisit 1
Business Processes 1
Research & Technology Management 1
Defence Policy and Functions - Support 1
IS (International Security) 1
Platforms 9
Combat Aircraft 3
Commercial Aircraft 2
Communications Satellites 1
Drone 4
Fighting Land Vehicles 4
Fighting Sea Surface Platforms 2
Helicopters 3
Lighter-than-Air Platforms 1
Logistic, Command and Surveillance Land Vehicles 2
Logistic, Support and Surveillance Aircraft 1
Space Launchers 3
Surveillance and Navigation Satellites 1
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 6
Weapons 9
Directed Energy Weapons 1
Gun Systems - Hand Held 4
Gun Systems - Platform Mounted 5
Missiles - Anti Air 3
Missiles - Anti Ground (Land) 2
Missiles - Anti Surface (Sea) 3
Torpedoes - Anti Submarine 1
Defense Underpinning Technologies 13
Chemical & Biological Materials 2
Medical Products and Materials 2
Computing Technology 4
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 2
Protocol Technology 1
Software Engineering 1
Software Verification and Accreditation Techniques 1
Electronic & Electrical Device Technology 3
Acoustic Power Sources & Devices 1
Electric Motors 1
Electrical Batteries 1
Inertial/Gravitational Devices 1
Other Electrical Power Sources & Devices 1
RF Power Sources & Devices 1
Electronic Materials 2
Insulating and Dielectric Materials 1
Silicon-based Materials 2
Information & Signal Processing 4
Data & Information Management Technology 1
Digital Signal Processing Technology 1
Image/Pattern Processing Technology 1
Modelling and Simulation Technology 1
Mechanical, Thermal and Fluid-Related Technologies 2
Fluid Mechanics-Phenomenological and Experimental 1
Mechanical / Hydraulic Technologies and Devices 1
Thermal and Thermodynamic Technologies and Devices 2
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 1
Display Materials & Devices 1
Optical Materials & Devices 1
Signature Related Materials 2
Acoustic & Vibration Absorbing Materials 2
Structural Materials 2
Corrosion and Wear Control Technology 1
Forming 1
Metals and Metal Matrix Composite 1
Surface Protection Technologies 1
Distributor 8
Education and Training 3
Expert 2
Industry 4.0 10
3D Printing 1
Augmented Reality 1
Big Data and Analytics 2
Cybersecurity 6
Industrial Internet of Things (IIoT) 5
Simulation 1
The Cloud Computing 1
Maintenance & Repair 5
Manufacturer 35
Media 6
Service Provider 104
Legal 88
Service Providers 5
Supplier 15
Unmanned Vehicles & Platforms 9
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 1
Propulsion 1
Vehicle Command and Control 2
Locations
United States 10
Alabama 1
California 1
Minnesota 1
New York 2
Pennsylvania 2
Utah 1
Washington 2
Argentina 1
Australia 2
QLD 1
Austria 1
Czech Republic 1
France 2
Germany 2
India 6
Gujarat 2
Maharashtra 1
Ireland 2
Italy 1
Mexico 1
Pakistan 1
Poland 1
Romania 1
Singapore 1
Spain 1
Switzerland 1
Thailand 1
Turkey 9
Ankara 2
Istanbul 3
United Arab Emirates 1
United Kingdom 3
England 1
BEMSCO INC.
+18014877455
Write a review
BEMSCO INC.
in Warheads Penetrators Gun and Launch Tube Propulsion Advanced Prototyping Techniques and Systems for Production Manufact.
(+10)
Lean Manufacturing Landing Gear Nacelles/Pylons Stabilizers Main Rotor(S) Main Rotor Drive(S) Tail Rotor Tail Rotor Drive Manufacturer AS 9100 QMS
Bemsco Inc, 400 West, Salt Lake City, Utah 84101, United States
Bemsco is a privately held small business that has been manufacturing products for the DOD and commercial sources for over 50 years.
+18014877455
Shadin Avionics
952-927-6500
Write a review
Shadin Avionics
in Indicating / Recording System Integrated Modular Avionics Manufacturer AS 9100 QMS Aerospace Sensors
7555 Marketplace Dr, Eden Prairie, Minnesota 55344, United States
Shadin Avionics is a leader in the design and manufacturing of aircraft fuel management an engine monitoring products, data converters, and avionics interface systems for commercial, business, defense, special mission, unmanned, and general aviation.
952-927-6500
Sensitron Semiconductor
(631) 586-7600
Write a review
Sensitron Semiconductor
in Fighting Land Vehicles Combat Aircraft Unmanned Land, Sea, Air Vehicles Lighter-than-Air Platforms Space Launchers
(+15)
Fighting Sea Surface Platforms Missiles - Anti Air Gun Systems - Platform Mounted Directed Energy Weapons Commercial Aircraft Manufacturer Supplier Space Ground Systems Naval Systems Aircraft Engines Maintenance Repair and Operations (MRO) Unmanned Vehicle Aircraft (UAV, Drone) Maintenance & Repair Unmanned Vehicles & Platforms
100 Engineers Road Hauppauge, , New York 11788, United States
Sensitron has over 50 years of heritage as a leading manufacturer of high reliability power electronic component solutions for the Defense, Aerospace, Space,Medical and other high reliability markets.
(631) 586-7600
MXTREALITY
+18446972333
Write a review
MXTREALITY
in Modelling and Simulation Technology Virtual Reality Manufacturing Process Simulation Manufacturer Service Provider
(+1)
Simulation
3200 1st Ave South, STE 300,, Washington 98134, United States
We offer a unique set of multi-sensory solutions that can work on nearly every device, with an almost unlimited number of peripheral plug-ins to offer experiences that work for everyone, every device, every ability, everywhere.
+18446972333
Miniature & Specialty Ball Bearings - Made in USA
518-283-8002
Write a review
Miniature & Specialty Ball Bearings - Made in USA
in Lean Manufacturing Manufacturer AS 9100 QMS I. Unmanned Aerial Vehicles
145 Jordan Road, New York 12180, United States
Pacamor Kubar Bearings (PKB) is an industry leader in the manufacturing & development of precision and miniature ball bearings. 
518-283-8002
ALATUS AEROSYSTEMS
+491724555255
Write a review
ALATUS AEROSYSTEMS
in Logistic, Command and Surveillance Land Vehicles Combat Aircraft Logistic, Support and Surveillance Aircraft Helicopters Unmanned Land, Sea, Air Vehicles
(+15)
Space Launchers Gun Systems - Platform Mounted Gun Systems - Hand Held Fire Protection Landing Gear Fuselage Nacelles/Pylons Main Rotor(S) Tail Rotor Folding Blades/Pylon Rotors Flight Control Missiles, Drones, and Telemetry Manufacturer AS 9100 QMS Space
423 Berry Way, Brea, California 92821, United States
Alatus Aerosystems is an industry leader and key strategic partner in the aerospace industry.
+491724555255
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
Baker Manufacturing, Inc.
2538408610
Write a review
Baker Manufacturing, Inc.
in Manufacturer Supplier AS 9100 QMS Space Aerospace Materials
1640 Marine View Dr, Suite B, Washington 98422, United States
Baker Manufacturing is a third-generation, family-owned business that crafts high precision metal parts and tooling for the aerospace and maritime industries. The company is based in Washington, with a second location in Texas.
2538408610
D&E Machining Ltd.
18146643531
Write a review
D&E Machining Ltd.
in Undersea Platforms Fighting Land Vehicles Helicopters Space Launchers Fighting Sea Surface Platforms
(+15)
Missiles - Anti Air Missiles - Anti Surface (Sea) Missiles - Anti Ground (Land) Torpedoes - Anti Submarine Drone Manufacturer Supplier AS 9100 QMS Space Aerial Systems Ground Systems Naval Systems Aircraft Construction, Assembly and Sub-assembly Aircraft Engines Unmanned Vehicles & Platforms
150 Industrial Drive Corry, Pennsylvania 16407, United States
We provide comprehensive component manufacturing services in-house as well as through our group of tightly controlled secondary service partners.
18146643531
Polaris Sensor Technologies, Inc.
256-562-0087x7664
Write a review
Polaris Sensor Technologies, Inc.
in Mathematical Modelling Development Optical Designs IR Sensors - Active IR Sensors - Passive Explosive Detection Sensors
(+5)
Environmental Monitoring Systems Navigation systems Advanced Prototyping ISTAR (Intelligence, Surveillance, Target Acquisit Unmanned Vehicles & Platforms
200 Westside Sq, Ste 320, Alabama 35801-4875, United States
Founded in 2003, Polaris Sensor Technologies, Inc. is a leading electro-optic sensor company that specializes in enhancing thermal imagery with polarization.
256-562-0087x7664
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register