List with Us Sign In

Listings in 3D Printing, Fluid Mechanics-Phenomenological and Experimental, Techniques and Systems for Production Manufact. and Space

Showing 12 of 26 results
Categories
Space 17
Defense Technologies 75
Manufacturing Processing / Design Tools 21
Techniques and Systems for Production Manufact. 6
Advanced Prototyping 9
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 5
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 6
Communications & CIS 15
Air Traffic Control Systems 2
Command & Information Systems Integration 3
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Communications systems-micro-and millimetre wave 1
Infrastructure to Support Information Management 1
Network Management Systems 4
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 21
Acoustic Designs 2
Aerodynamic Designs 3
Ballistic Designs 7
Electrical / Electronic Designs 5
Hydrodynamic Designs 1
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 4
Thermal / Cryogenic Designs 2
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 7
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 4
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 5
Integrated Systems 17
Health Monitoring Systems 2
Integrated System Testing and Evaluation 4
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 5
System Repair Technologies 3
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 13
Armour systems 7
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 10
Electrical Propulsion - rotary & linear 3
Final Drive - Wheels and Tracks 1
Gas Turbines 5
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 4
Transmissions and Powertrains 3
Sensor Systems 9
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 56
Mechanical, Thermal and Fluid-Related Technologies 10
Fluid Mechanics-Phenomenological and Experimental 1
Fluid Dynamics Techniques 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 7
Thermal and Thermodynamic Technologies and Devices 4
Chemical & Biological Materials 6
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 5
Computing Technology 10
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 2
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 12
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 3
Device Integration & Reliability 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 3
Other Electrical Power Sources & Devices 4
RF Power Sources & Devices 3
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 6
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 4
Information & Signal Processing 14
Data & Information Management Technology 5
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Operating Environments 2
Acoustic Propagation in Air & Water 1
Meteorology 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 24
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 7
Surface Protection Technologies 5
Industry 4.0 22
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 9
Industrial Internet of Things (IIoT) 7
Simulation 3
The Cloud Computing 3
AS 9100 QMS 58
Academia / Cluster / Association 1
Aerospace 66
Aerospace Materials 20
Aerospace Power Plants and Related Equipments 7
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 9
Aircraft Engines 8
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 5
Maintenance Repair and Operations (MRO) 12
Onboard Equipment Systems 4
Production Equipment and Software 8
Unmanned Vehicle Aircraft (UAV, Drone) 20
Aviation (ATA 100 Chapters) 49
(Airborne) Auxiliary Power Unit (APU) 1
Accessory Gear Box (Engine Driven) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 4
Communication 7
Electrical - Electronic Panels Components 5
Electrical Power 4
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 3
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 4
Lights 1
Main Rotor Drive(S) 3
Main Rotor(S) 4
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 3
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Wings 1
Defence 22
Aerial Systems 11
Ammunition Technology 7
Ground Systems 14
Naval Systems 8
Defense Products 59
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 6
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 2
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 36
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 6
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 3
Space Launchers 3
Surveillance and Navigation Satellites 5
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 16
Weapons 18
Directed Energy Weapons 5
Gun Systems - Hand Held 10
Gun Systems - Platform Mounted 11
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 27
Education and Training 20
Events Organizer 1
Expert 10
Maintenance & Repair 14
Manufacturer 125
Media 32
Service Provider 136
Legal 85
Service Providers 12
Supplier 34
Unmanned Vehicles & Platforms 26
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 2
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 3
Propulsion 2
Transport Vehicles 2
Vehicle Command and Control 2
Locations
Argentina 1
Australia 1
QLD 1
Canada 1
Ontario 1
France 2
Germany 2
India 3
Gujarat 1
Indonesia 1
Italy 1
Malaysia 1
Mexico 1
Pakistan 1
Singapore 3
Switzerland 1
Turkey 7
Ankara 1
Istanbul 2
United Kingdom 2
England 1
United States 8
California 1
Iowa 1
New York 1
Pennsylvania 3
Utah 1
Washington 1
Type
Listing 26
Deal 5
D&E Machining Ltd.
18146643531
Write a review
D&E Machining Ltd.
in Undersea Platforms Fighting Land Vehicles Helicopters Space Launchers Fighting Sea Surface Platforms
(+15)
Missiles - Anti Air Missiles - Anti Surface (Sea) Missiles - Anti Ground (Land) Torpedoes - Anti Submarine Drone Manufacturer Supplier AS 9100 QMS Space Aerial Systems Ground Systems Naval Systems Aircraft Construction, Assembly and Sub-assembly Aircraft Engines Unmanned Vehicles & Platforms
150 Industrial Drive Corry, Pennsylvania 16407, United States
We provide comprehensive component manufacturing services in-house as well as through our group of tightly controlled secondary service partners.
18146643531
BEMSCO INC.
+18014877455
Write a review
BEMSCO INC.
in Warheads Penetrators Gun and Launch Tube Propulsion Advanced Prototyping Techniques and Systems for Production Manufact.
(+10)
Lean Manufacturing Landing Gear Nacelles/Pylons Stabilizers Main Rotor(S) Main Rotor Drive(S) Tail Rotor Tail Rotor Drive Manufacturer AS 9100 QMS
Bemsco Inc, 400 West, Salt Lake City, Utah 84101, United States
Bemsco is a privately held small business that has been manufacturing products for the DOD and commercial sources for over 50 years.
+18014877455
ALATUS AEROSYSTEMS
+491724555255
Write a review
ALATUS AEROSYSTEMS
in Logistic, Command and Surveillance Land Vehicles Combat Aircraft Logistic, Support and Surveillance Aircraft Helicopters Unmanned Land, Sea, Air Vehicles
(+15)
Space Launchers Gun Systems - Platform Mounted Gun Systems - Hand Held Fire Protection Landing Gear Fuselage Nacelles/Pylons Main Rotor(S) Tail Rotor Folding Blades/Pylon Rotors Flight Control Missiles, Drones, and Telemetry Manufacturer AS 9100 QMS Space
423 Berry Way, Brea, California 92821, United States
Alatus Aerosystems is an industry leader and key strategic partner in the aerospace industry.
+491724555255
+90 3D Digital Factory
+90 850 502 90 90
Write a review
+90 3D Digital Factory
in Manufacturer Service Provider AS 9100 QMS 3D Printing
IMES Sanayi Sitesi, A Blok, 101. Sokak, No: 3 Yukarı Dudullu, , Istanbul 34775, Turkey
For more than 15 years, +90 3D Digital Factory offers 3D manufacturing solutions to rapid part needs of its customers.
+90 850 502 90 90
SQUARE-BIZ
Write a review
SQUARE-BIZ
in Service Provider Space Education and Training Aerial Systems Ground Systems
(+4)
Naval Systems Ammunition Technology Navigation, Guidance Fire Control
Bern, Switzerland
Square-Biz is a kind of Private Intelligence service, but in a different way than the usual one. We also provide innovations in several fields, including Defense.
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
Turbo Cast (India) Pvt. Ltd.
+919825107090
Write a review
Turbo Cast (India) Pvt. Ltd.
in Metals and Metal Matrix Composite Forming Optical Materials & Devices Display Materials & Devices Medical Products and Materials
(+7)
Mechanical / Hydraulic Technologies and Devices Thermal and Thermodynamic Technologies and Devices Fluid Mechanics-Phenomenological and Experimental Power Plant Weapon System Manufacturer AS 9100 QMS
35 / Silver Sand, Opp - Big Bazaar, 150 Feet Ring Road, Rajkot 360 001, India
Turbo Cast (India) Pvt. Ltd. is India's First Indigenous Investment Casting Foundry, started in 2015, especially for Aerospace, Defense, Medical & Aluminum Alloy, Accredited for AS9100D & Nadcap (NDT & Welding) certification.
+919825107090
Argyle Materials, Inc.
855 527 4953
Write a review
Argyle Materials, Inc.
in 3D Printing
920 West 10th Street, Iowa 50219, United States
Since 2009 a leading Materials Company focused on the Rapid Prototyping and Rapid Manufacturing Industries.
855 527 4953
Baker Manufacturing, Inc.
2538408610
Write a review
Baker Manufacturing, Inc.
in Manufacturer Supplier AS 9100 QMS Space Aerospace Materials
1640 Marine View Dr, Suite B, Washington 98422, United States
Baker Manufacturing is a third-generation, family-owned business that crafts high precision metal parts and tooling for the aerospace and maritime industries. The company is based in Washington, with a second location in Texas.
2538408610
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
CTECH Information Technologies Inc.
+902162905286
Write a review
CTECH Information Technologies Inc.
in Software Engineering Protocol Technology Secure Computing Techniques Encryption/ Crypto Technology Mathematical Modelling Development
(+15)
Software Verification and Accreditation Techniques Data & Information Management Technology Digital Signal Processing Technology Optical Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Communication Navigation Electrical - Electronic Panels Components Multisystem Integrated Modular Avionics Information Systems Electronic Warfare System Manufacturer Space
Teknopark İstanbul, TGB, Sanayi Mah. Teknopark Bulvarı, No:1, Blok:1 Kat:2 Kurtköy-Pendik, Istanbul 34912, Turkey
C Tech Information Technologies Inc. founded in 2005, operates in Defense, Aerospace, Satellite Technologies, Communication Systems, Cyber Security, Modeling and Simulation.
+902162905286
Protonautics Pty Ltd
+61400433710
Write a review
Protonautics Pty Ltd
in Standard Practices And Structures - General Manufacturer AS 9100 QMS Space
23 Westgate St, Wacol, QLD 4076, Australia
Protonautics is an AS9100:D certified manufacturer of components for Aerospace and Defence clients. Our certification scope include machined components, chemical surface treatments and assembly services.
+61400433710
1 2 3
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register