Listings in Concurrent Engineering and Reduced Design Cycle, Physical Protection Systems - Environment and Space Launchers

Categories

Defense Products 59

Platforms 36

Space Launchers 3

Combat Aircraft 8

Commercial Aircraft 4

Communications Satellites 6

Drone 13

Fighting Land Vehicles 10

Fighting Sea Surface Platforms 2

Helicopters 10

Lighter-than-Air Platforms 2

Logistic, Command and Surveillance Land Vehicles 9

Logistic, Support and Surveillance Aircraft 5

Other Satellites 3

Surveillance and Navigation Satellites 5

Undersea Platforms 1

Unmanned Land, Sea, Air Vehicles 16

Battlespace Information 6

Command & Control 1

Digitization of the Battlespace 1

ISTAR (Intelligence, Surveillance, Target Acquisit 3

Information Warfare 1

Military Intelligence 2

Business Processes 8

Benchmarking & Best Practice 1

Business Process Simulation 1

Concepts & Product Definition 1

Procurement & Contracting Processes 3

Product Supportability 2

Research & Technology Management 3

Whole Life Cycle Improvement 1

Defence Analysis 2

Military Doctrine Analysis 1

Platform and System Concept Studies 1

Tactical Develop. and Supp. to Operation/Training 1

Defence Policy and Functions - Support 5

Equipment Disposal & Enviromental Protection 1

IS (International Security) 2

Logistics 2

Equipped Personnel 3

Equipped Men 1

Training & Education 2

Installations 6

Battlefield Engineering 2

Fortifications/Defences 3

Ground Stations 2

T&E Facilities (Test and Evaluation Facilities) 1

Weapons 18

Directed Energy Weapons 5

Gun Systems - Hand Held 10

Gun Systems - Platform Mounted 11

Mines - Land 3

Mines - Sea 3

Missiles - Anti Air 8

Missiles - Anti Ground (Land) 5

Missiles - Anti Surface (Sea) 7

Non-Lethal Weapons 2

Torpedoes - Anti Submarine 4

Torpedoes - Anti Surface 3

Defense Technologies 75

Manufacturing Processing / Design Tools 21

Concurrent Engineering and Reduced Design Cycle 3

Advanced Prototyping 9

Cost Engineering 2

Design for Improved Reliability & Maintainability 5

Environmentally Friendly Factory Processes 4

Knowledge-based Engineering 4

Lean Manufacturing 10

Manufacturing Process Simulation 7

Process Control Technology 7

Project Management and Control 6

Techniques and Systems for Production Manufact. 6

Personnel Protection Measures 2

Physical Protection Systems - Environment 1

CB & N Protection Systems - Physical 1

Physical Protection Systems - Threat 2

Communications & CIS 15

Air Traffic Control Systems 2

Command & Information Systems Integration 3

Communications & CIS Security systems 3

Communications systems - Acoustic 2

Communications systems - IR / Visible / UV 1

Communications systems-micro-and millimetre wave 1

Infrastructure to Support Information Management 1

Network Management Systems 4

Optimisation, Planning & Decision Support systems 2

Design Aspects - Platforms and Weapons 21

Acoustic Designs 2

Aerodynamic Designs 3

Ballistic Designs 7

Electrical / Electronic Designs 5

Hydrodynamic Designs 1

Mechanical Designs 8

Optical Designs 1

Stealth Designs 1

Structural Designs 4

Thermal / Cryogenic Designs 2

Electronic Warfare & DEW 8

DET - Other 1

DET - RF 2

DET -Lasers 1

ECM - Acoustic 1

ECM - RF 1

EOCM - IR / Visible / UV 1

EOPM - IR / Visible / UV 1

EPM - RF 2

ESM - Communications 5

ESM - Non-Communications 1

Guidance & Control Weapons and Platforms 7

Display systems 1

Navigation systems 3

Platform Guidance and Control systems 4

Stores and Weapons Release / Discharge systems 1

Weapon Guidance and Control systems 5

Integrated Systems 17

Health Monitoring Systems 2

Integrated System Testing and Evaluation 4

Middleware systems 1

Reliability and Maintainability of Systems 1

Robotics and Automated systems in Operational Sys. 3

Safety systems 5

System Repair Technologies 3

Systems Engineering and Integrated Systems Design 6

Lethality & Platform Protection 13

Armour systems 7

Battle Damage Reduction Techniques 1

Defensive Aids Suite systems 1

Explosive Ordnance Disposal 2

Mine Detection and Clearance 2

Other Platform Protection Measures 1

Penetrators 2

Warheads 2

Propulsion and Powerplants 10

Electrical Propulsion - rotary & linear 3

Final Drive - Wheels and Tracks 1

Gas Turbines 5

Gun and Launch Tube Propulsion 1

Rocket Engines and Ramjets 4

Transmissions and Powertrains 3

Sensor Systems 9

Acoustic Sensors - Active 1

Electrical & Electrochemical Sensors 1

Environmental Monitoring Systems 2

Explosive Detection Sensors 1

IR Sensors - Active 5

IR Sensors - Passive 5

Magnetic Sensors 1

Motion Sensor systems 1

RF Sensors / Antennas - Active 2

RF Sensors / Antennas -Passive 2

Visible / UV Wave Sensors 1

Signature Control & Reduction 2

Electrical and Electrochemical Signatures 1

Radar Signatures 1

Simulators, Trainers and Synthetic Environment 8

Command & Staff Training Systems 1

Skills Training Systems 3

Tactical / Crew Training systems 4

Virtual Reality 3

AS 9100 QMS 58

Academia / Cluster / Association 1

Aerospace 66

Aerospace Materials 20

Aerospace Power Plants and Related Equipments 7

Aerospace Sensors 8

Air Traffic Control 2

Aircraft Construction, Assembly and Sub-assembly 9

Aircraft Engines 8

Airport Equipments and Services 2

Cabin and Seat Layouts 3

Cargo and Logistics 5

Maintenance Repair and Operations (MRO) 12

Onboard Equipment Systems 4

Production Equipment and Software 8

Unmanned Vehicle Aircraft (UAV, Drone) 20

Aviation (ATA 100 Chapters) 49

(Airborne) Auxiliary Power Unit (APU) 1

Accessory Gear Box (Engine Driven) 1

Air Conditioning 2

Auto Flight 2

Bleed Air 1

Cabin Systems 4

Communication 7

Electrical - Electronic Panels Components 5

Electrical Power 4

Electrical Power Multiplexing 1

Electronic Warfare System 2

Engine 4

Engine - Fuel and Control 1

Engine Controls 3

Engine Indicating 1

Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3

Equipment /Furnishings 2

Fire Protection 3

Flight Controls 3

Folding Blades/Pylon 1

Fuel 1

Fuselage 3

Hydraulic Power 1

Ice And Rain Protection 2

In-Flight Fuel Dispensing 1

Indicating / Recording System 1

Inert Gas System 1

Information Systems 1

Integrated Modular Avionics 4

Landing Gear 4

Lights 1

Main Rotor Drive(S) 3

Main Rotor(S) 4

Missiles, Drones, and Telemetry 8

Multisystem 1

Nacelles/Pylons 2

Navigation 4

Oil 1

Onboard Maintenance Systems 1

Oxygen 1

Pneumatic 2

Power Plant 3

Rotors Flight Control 2

Stabilizers 3

Standard Practices And Structures - General 1

Surveillance 4

Tail Rotor 3

Tail Rotor Drive 2

Vacuum 1

Weapon System 3

Wings 1

Defence 22

Aerial Systems 11

Ammunition Technology 7

Ground Systems 14

Naval Systems 8

Defense Underpinning Technologies 56

Chemical & Biological Materials 6

Biological Agent Defence, Precursors 1

Chemical Agent Defence, Precursors 1

Medical Products and Materials 5

Computing Technology 10

Architectures 1

Encryption/ Crypto Technology 3

High Integrity & Safety Critical Computing 2

Mathematical Modelling Development 4

OA Tools and Techniques 1

Protocol Technology 2

Secure Computing Techniques 1

Software Engineering 5

Software Verification and Accreditation Techniques 4

Electronic & Electrical Device Technology 12

Acoustic Power Sources & Devices 1

Device Concepts & Fabrication 3

Device Integration & Reliability 2

Electric Motors 2

Electrical Batteries 2

Inertial/Gravitational Devices 3

Other Electrical Power Sources & Devices 4

RF Power Sources & Devices 3

Electronic Materials 4

Insulating and Dielectric Materials 2

Magnetic Materials 1

Silicon-based Materials 3

Superconducting Materials 1

Energetic Materials and Plasma Technology 2

Explosives 2

Propellants 2

Pyrotechnics 1

Human Sciences 6

Human Performance Enhancement 1

Human Survivability, Protection & Stress Effects 2

Human-Factors Integration 1

Military Human Resources 4

Information & Signal Processing 14

Data & Information Management Technology 5

Digital Signal Processing Technology 4

Image/Pattern Processing Technology 6

Information and Data Fusion Technology 4

Modelling and Simulation Technology 3

Optical Signal Processing Technology 2

Optimisation & Decision Support Technology 2

Speech & Natural Language Processing Technology 2

Mechanical, Thermal and Fluid-Related Technologies 10

Fluid Dynamics Techniques 1

Fluid Mechanics-Phenomenological and Experimental 1

Lubrication Technology 2

Mechanical / Hydraulic Technologies and Devices 7

Thermal and Thermodynamic Technologies and Devices 4

Operating Environments 2

Acoustic Propagation in Air & Water 1

Meteorology 1

Photonic/Optical Materials & Device 3

Display Materials & Devices 2

IR/Visible/UV Detector Materials & Devices 1

Lasers (All Types) 1

Non-Laser Devices 1

Optical Materials & Devices 2

Transparent Materials 1

Signature Related Materials 6

Acoustic & Vibration Absorbing Materials 4

Radar Absorbing Materials & Coatings 3

Structural Materials 24

Ceramics, Ceramic Matrix Composite and Glass 2

Corrosion and Wear Control Technology 3

Forming 10

Joining Technology 4

Life Extension of Structural Materials 2

Materials Removal 2

Metals and Metal Matrix Composite 13

Polymers and Polymer Matrix Composite 3

Smart/Functional Materials for Structural Uses 1

Structural Mechanics 7

Surface Protection Technologies 5

Distributor 27

Education and Training 20

Events Organizer 1

Expert 10

Industry 4.0 23

3D Printing 4

Augmented Reality 1

Autonomous Robots 1

Big Data and Analytics 4

Cybersecurity 9

Industrial Internet of Things (IIoT) 8

Simulation 3

The Cloud Computing 3

Maintenance & Repair 14

Manufacturer 125

Media 32

Service Provider 136

Legal 85

Service Providers 12

Space 17

Supplier 34

Unmanned Vehicles & Platforms 26

Command and Control Subsystem 1

Data Display and Controls 1

Electrical Subsystem 1

Fire Control 1

I. Autonomous Surface Vehicles 2

I. Unmanned Aerial Systems 1

I. Unmanned Aerial Vehicles 2

I. Unmanned Ground Vehicles 1

I. Unmanned Maritime System 1

I. Unmanned Maritime Vehicle 1

Mission Computer, Processing 1

Navigation, Guidance 3

Propulsion 2

Transport Vehicles 2

Vehicle Command and Control 2

+905324659048

Write a review

Nümerik Makina Mühendislik Döküm

Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey

Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.

+905324659048

+12677330200

Write a review

Pulse Technologies

in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control

2000 AM Drive Quakertown, Pennsylvania 18951, United States

As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.

+12677330200

(631) 586-7600

Write a review

Sensitron Semiconductor

100 Engineers Road Hauppauge, , New York 11788, United States

Sensitron has over 50 years of heritage as a leading manufacturer of high reliability power electronic component solutions for the Defense, Aerospace, Space,Medical and other high reliability markets.

(631) 586-7600

18146643531

Write a review

D&E Machining Ltd.

150 Industrial Drive Corry, Pennsylvania 16407, United States

We provide comprehensive component manufacturing services in-house as well as through our group of tightly controlled secondary service partners.

18146643531

+90 555 714 95 94

Write a review

Ben.x Tactical

in Physical Protection Systems - Threat Physical Protection Systems - Environment Manufacturer

i.o.s.b. Mahallesi, Mutsan Sanayi Sitesi, M4 Blok No 10 34480, Turkey

The thin profile design, ultra light and flexible Ben.x Tactical glasses provide high comfort in the life of the wearer. Its panoramic feature offers a wide field of view. It is resistant to unexpected impacts in harsh weather conditions.

+90 555 714 95 94

+491724555255

Write a review

ALATUS AEROSYSTEMS

423 Berry Way, Brea, California 92821, United States

Alatus Aerosystems is an industry leader and key strategic partner in the aerospace industry.

+491724555255

+971559869752

Write a review

Advanced Armour Engineering

in Metals and Metal Matrix Composite Joining Technology Forming Armour systems Ballistic Designs

T5 - 25 Sharjah Airport International Freezone, Sharjah, United Arab Emirates

Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.

+971559869752

Listings in Concurrent Engineering and Reduced Design Cycle, Physical Protection Systems - Environment and Space Launchers

Download our app to your mobile phone