List with Us Sign In

Listings in Medical Products and Materials, 3D Printing, Structural Materials and Environmental Monitoring Systems

Showing 12 of 32 results
Categories
Defense Technologies 75
Sensor Systems 9
Environmental Monitoring Systems 2
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 15
Air Traffic Control Systems 2
Command & Information Systems Integration 3
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Communications systems-micro-and millimetre wave 1
Infrastructure to Support Information Management 1
Network Management Systems 4
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 21
Acoustic Designs 2
Aerodynamic Designs 3
Ballistic Designs 7
Electrical / Electronic Designs 5
Hydrodynamic Designs 1
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 4
Thermal / Cryogenic Designs 2
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 7
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 4
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 5
Integrated Systems 17
Health Monitoring Systems 2
Integrated System Testing and Evaluation 4
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 5
System Repair Technologies 3
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 13
Armour systems 7
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Manufacturing Processing / Design Tools 21
Advanced Prototyping 9
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 5
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 6
Techniques and Systems for Production Manufact. 6
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 10
Electrical Propulsion - rotary & linear 3
Final Drive - Wheels and Tracks 1
Gas Turbines 5
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 4
Transmissions and Powertrains 3
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 56
Structural Materials 24
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 7
Surface Protection Technologies 5
Chemical & Biological Materials 6
Medical Products and Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Computing Technology 10
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 2
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 12
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 3
Device Integration & Reliability 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 3
Other Electrical Power Sources & Devices 4
RF Power Sources & Devices 3
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 6
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 4
Information & Signal Processing 14
Data & Information Management Technology 5
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 10
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 7
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 2
Acoustic Propagation in Air & Water 1
Meteorology 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Industry 4.0 23
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 9
Industrial Internet of Things (IIoT) 8
Simulation 3
The Cloud Computing 3
AS 9100 QMS 58
Academia / Cluster / Association 1
Aerospace 66
Aerospace Materials 20
Aerospace Power Plants and Related Equipments 7
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 9
Aircraft Engines 8
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 5
Maintenance Repair and Operations (MRO) 12
Onboard Equipment Systems 4
Production Equipment and Software 8
Unmanned Vehicle Aircraft (UAV, Drone) 20
Aviation (ATA 100 Chapters) 49
(Airborne) Auxiliary Power Unit (APU) 1
Accessory Gear Box (Engine Driven) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 4
Communication 7
Electrical - Electronic Panels Components 5
Electrical Power 4
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 3
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 4
Lights 1
Main Rotor Drive(S) 3
Main Rotor(S) 4
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 3
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Wings 1
Defence 22
Aerial Systems 11
Ammunition Technology 7
Ground Systems 14
Naval Systems 8
Defense Products 59
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 6
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 2
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 36
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 6
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 3
Space Launchers 3
Surveillance and Navigation Satellites 5
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 16
Weapons 18
Directed Energy Weapons 5
Gun Systems - Hand Held 10
Gun Systems - Platform Mounted 11
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 27
Education and Training 20
Events Organizer 1
Expert 10
Maintenance & Repair 14
Manufacturer 126
Media 32
Service Provider 144
Legal 93
Service Providers 12
Space 17
Supplier 34
Unmanned Vehicles & Platforms 26
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 2
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 3
Propulsion 2
Transport Vehicles 2
Vehicle Command and Control 2
Locations
Canada 1
Ontario 1
Czech Republic 1
France 1
Germany 1
India 5
Gujarat 1
Indonesia 1
Iraq 1
Ireland 1
Italy 2
Malaysia 1
Mexico 1
Portugal 1
Serbia 1
Singapore 2
South Korea 1
Spain 2
Switzerland 1
Thailand 1
Turkey 8
Ankara 2
United Arab Emirates 1
United Kingdom 1
United States 5
Alabama 1
Georgia 1
Iowa 1
Pennsylvania 1
ASHTON & MOORE LIMITED
+448456188196
Write a review
ASHTON & MOORE LIMITED
in Life Extension of Structural Materials Military Human Resources Armour systems Combat Aircraft Helicopters
(+15)
Unmanned Land, Sea, Air Vehicles Communications Satellites Mines - Land Missiles - Anti Air Missiles - Anti Surface (Sea) Gun Systems - Platform Mounted Gun Systems - Hand Held Non-Lethal Weapons Mines - Sea Torpedoes - Anti Surface Torpedoes - Anti Submarine Battlefield Engineering Ice And Rain Protection Service Provider AS 9100 QMS
12 Smith Street, Hockley, Birmingham, B19 3EX, United Kingdom
Successfully undertake a wide variety of finishing processes including plating, anodizing, painting, and electroplating. Ashton & Moore is one of the UK’s leading aerospace and defence finishing services supplier.
+448456188196
BNR EXPORTS
+919632166599
Write a review
BNR EXPORTS
in Forming Materials Removal Gas Turbines Mechanical Designs Stealth Designs
(+8)
Main Rotor(S) Main Rotor Drive(S) Tail Rotor Drive Engine Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan Bleed Air Manufacturer AS 9100 QMS
B.N.R. Exports, Bommasandra Industrial Area, Bangalore, Karnataka, India
We are pleased to Introduce BNR EXPORTS as a 100% EOU established in the year 2000 Manufacturing precision machined and turned components.
+919632166599
MAK SAVUNMA SANAYI LTD STI
+9 0 312 256 1606
Write a review
MAK SAVUNMA SANAYI LTD STI
in Metals and Metal Matrix Composite Structural Mechanics Forming RF Power Sources & Devices Other Electrical Power Sources & Devices
(+9)
Electric Motors Mechanical / Hydraulic Technologies and Devices Final Drive - Wheels and Tracks Mechanical Designs Fighting Land Vehicles Gun Systems - Platform Mounted Gun Systems - Hand Held Manufacturer Distributor
Yenibatı Mahallesi 2401 Sokak No:8 Batıkent, Yenimahalle / Ankara / 06370, Turkey
Manufacture of mechanical, electromechanical, and electrical spare parts for the aerospace and defense industries for military and civilian purposes.
+9 0 312 256 1606
Masttech
+905356629060
Write a review
Masttech
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Joining Technology Structural Mechanics Forming
(+11)
Mathematical Modelling Development Software Verification and Accreditation Techniques Modelling and Simulation Technology Tactical / Crew Training systems Systems Engineering and Integrated Systems Design Fighting Land Vehicles Logistic, Command and Surveillance Land Vehicles Unmanned Land, Sea, Air Vehicles Manufacturer Service Provider Education and Training
ASO 1. Org. San. Böl. / Ahi Evran OSB Mah./ Nahçivan Cad. No: 8/2 Sincan / ANKARA, Turkey
Masttech was established in Ankara in 2019 as the latest Turkish-American joint venture company in the defense industry.
+905356629060
Turbo Cast (India) Pvt. Ltd.
+919825107090
Write a review
Turbo Cast (India) Pvt. Ltd.
in Metals and Metal Matrix Composite Forming Optical Materials & Devices Display Materials & Devices Medical Products and Materials
(+7)
Mechanical / Hydraulic Technologies and Devices Thermal and Thermodynamic Technologies and Devices Fluid Mechanics-Phenomenological and Experimental Power Plant Weapon System Manufacturer AS 9100 QMS
35 / Silver Sand, Opp - Big Bazaar, 150 Feet Ring Road, Rajkot 360 001, India
Turbo Cast (India) Pvt. Ltd. is India's First Indigenous Investment Casting Foundry, started in 2015, especially for Aerospace, Defense, Medical & Aluminum Alloy, Accredited for AS9100D & Nadcap (NDT & Welding) certification.
+919825107090
BEAMIT SPA
+390525401281
Write a review
BEAMIT SPA
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Gas Turbines Rocket Engines and Ramjets Transmissions and Powertrains
(+15)
Design for Improved Reliability & Maintainability Advanced Prototyping Techniques and Systems for Production Manufact. Environmentally Friendly Factory Processes Fighting Land Vehicles Combat Aircraft Helicopters Unmanned Land, Sea, Air Vehicles Lighter-than-Air Platforms Communications Satellites Manufacturer Service Provider AS 9100 QMS Space Aerospace Sensors
Strada Prinzera, 17 Fornovo di Taro (PR) 43045, Italy
BEAMIT Group is a European leading company in advanced manufacturing, that includes Additive Manufacturing and Post processes, as a unique organization with an integral internal value chain.
+390525401281
Argyle Materials, Inc.
855 527 4953
Write a review
Argyle Materials, Inc.
in 3D Printing
920 West 10th Street, Iowa 50219, United States
Since 2009 a leading Materials Company focused on the Rapid Prototyping and Rapid Manufacturing Industries.
855 527 4953
AEROTF
+34916388377
Write a review
AEROTF
in Metals and Metal Matrix Composite Forming Materials Removal Distributor Aerospace Materials
P.I. Ventorro del Cano Villaconejos, 16 Alcorcón, Madrid 28925, Spain
With over 20 years of experience in the aeronautical market, AeroTF is a specialist in the distribution of components and tools for both commercial and military aircraft and helicopters, and the space sector.
+34916388377
ARTFUL AERONAUTIC ASSEMBLIES LLC.
+17275220055
Write a review
ARTFUL AERONAUTIC ASSEMBLIES LLC.
in Medical Products and Materials Manufacturer AS 9100 QMS
2877 47th Ave N, St. Petersburg FL 33714, United States
Artful Aeronautic Assemblies, LLC is a certified contract sewing company specializing in the manufacturing of textile products for the military, government, industrial, and comcommercial aerospace industries.
+17275220055
Chemtron Pte Ltd.
+6591055786
Write a review
Chemtron Pte Ltd.
in Concepts & Product Definition Distributor 3D Printing Aerial Systems Ground Systems
(+3)
Naval Systems Ammunition Technology Maintenance Repair and Operations (MRO)
blk 203A henderson road,henderson industrial park, #02-03 159546, Singapore
We carry a complete portfolio of solutions that is making rapid head way into various industries such as manufacturing, medical, jewellery, aerospace and dental markets.
+6591055786
Jet Cut
+33471590882
Write a review
Jet Cut
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Structural Mechanics Armour systems Manufacturer
(+1)
AS 9100 QMS
Jet Cut - groupe Energie Métal ZI de Lavé, 43200 Yssingeaux, France
JET CUT has the widest range of waterjet cutting in Europe. We manage in real time your deported stock ensuring you an end-to-end traceability of your raw materials, scraps ans finished parts.
+33471590882
BLEIN MEYER SA
+41269122828
Write a review
BLEIN MEYER SA
in Structural Mechanics Manufacturer AS 9100 QMS Aerospace Materials
Blein, Meyer S.A., Route des Grands Bois, Gruyères, Switzerland
The company Blein Meyer S.A. was founded by Gerard Meyer, Michel Blein, and Irenée Sudan in 1964. Initially based in Bulle, the company has grown and is now based in Epagny (Gruyères).
+41269122828
1 2 3
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register