Listings in Reliability and Maintainability of Systems, Fluid Mechanics-Phenomenological and Experimental and Rocket Engines and Ramjets

Categories

Defense Technologies 75

Integrated Systems 17

Reliability and Maintainability of Systems 1

Health Monitoring Systems 2

Integrated System Testing and Evaluation 4

Middleware systems 1

Robotics and Automated systems in Operational Sys. 3

Safety systems 5

System Repair Technologies 3

Systems Engineering and Integrated Systems Design 6

Propulsion and Powerplants 10

Rocket Engines and Ramjets 4

Electrical Propulsion - rotary & linear 3

Final Drive - Wheels and Tracks 1

Gas Turbines 5

Gun and Launch Tube Propulsion 1

Transmissions and Powertrains 3

Communications & CIS 15

Air Traffic Control Systems 2

Command & Information Systems Integration 3

Communications & CIS Security systems 3

Communications systems - Acoustic 2

Communications systems - IR / Visible / UV 1

Communications systems-micro-and millimetre wave 1

Infrastructure to Support Information Management 1

Network Management Systems 4

Optimisation, Planning & Decision Support systems 2

Design Aspects - Platforms and Weapons 21

Acoustic Designs 2

Aerodynamic Designs 3

Ballistic Designs 7

Electrical / Electronic Designs 5

Hydrodynamic Designs 1

Mechanical Designs 8

Optical Designs 1

Stealth Designs 1

Structural Designs 4

Thermal / Cryogenic Designs 2

Electronic Warfare & DEW 8

DET - Other 1

DET - RF 2

DET -Lasers 1

ECM - Acoustic 1

ECM - RF 1

EOCM - IR / Visible / UV 1

EOPM - IR / Visible / UV 1

EPM - RF 2

ESM - Communications 5

ESM - Non-Communications 1

Guidance & Control Weapons and Platforms 7

Display systems 1

Navigation systems 3

Platform Guidance and Control systems 4

Stores and Weapons Release / Discharge systems 1

Weapon Guidance and Control systems 5

Lethality & Platform Protection 13

Armour systems 7

Battle Damage Reduction Techniques 1

Defensive Aids Suite systems 1

Explosive Ordnance Disposal 2

Mine Detection and Clearance 2

Other Platform Protection Measures 1

Penetrators 2

Warheads 2

Manufacturing Processing / Design Tools 21

Advanced Prototyping 9

Concurrent Engineering and Reduced Design Cycle 3

Cost Engineering 2

Design for Improved Reliability & Maintainability 5

Environmentally Friendly Factory Processes 4

Knowledge-based Engineering 4

Lean Manufacturing 10

Manufacturing Process Simulation 7

Process Control Technology 7

Project Management and Control 6

Techniques and Systems for Production Manufact. 6

Personnel Protection Measures 2

CB & N Protection Systems - Physical 1

Physical Protection Systems - Environment 1

Physical Protection Systems - Threat 2

Sensor Systems 9

Acoustic Sensors - Active 1

Electrical & Electrochemical Sensors 1

Environmental Monitoring Systems 2

Explosive Detection Sensors 1

IR Sensors - Active 5

IR Sensors - Passive 5

Magnetic Sensors 1

Motion Sensor systems 1

RF Sensors / Antennas - Active 2

RF Sensors / Antennas -Passive 2

Visible / UV Wave Sensors 1

Signature Control & Reduction 2

Electrical and Electrochemical Signatures 1

Radar Signatures 1

Simulators, Trainers and Synthetic Environment 8

Command & Staff Training Systems 1

Skills Training Systems 3

Tactical / Crew Training systems 4

Virtual Reality 3

Defense Underpinning Technologies 56

Mechanical, Thermal and Fluid-Related Technologies 10

Fluid Mechanics-Phenomenological and Experimental 1

Fluid Dynamics Techniques 1

Lubrication Technology 2

Mechanical / Hydraulic Technologies and Devices 7

Thermal and Thermodynamic Technologies and Devices 4

Chemical & Biological Materials 6

Biological Agent Defence, Precursors 1

Chemical Agent Defence, Precursors 1

Medical Products and Materials 5

Computing Technology 10

Architectures 1

Encryption/ Crypto Technology 3

High Integrity & Safety Critical Computing 2

Mathematical Modelling Development 4

OA Tools and Techniques 1

Protocol Technology 2

Secure Computing Techniques 1

Software Engineering 5

Software Verification and Accreditation Techniques 4

Electronic & Electrical Device Technology 12

Acoustic Power Sources & Devices 1

Device Concepts & Fabrication 3

Device Integration & Reliability 2

Electric Motors 2

Electrical Batteries 2

Inertial/Gravitational Devices 3

Other Electrical Power Sources & Devices 4

RF Power Sources & Devices 3

Electronic Materials 4

Insulating and Dielectric Materials 2

Magnetic Materials 1

Silicon-based Materials 3

Superconducting Materials 1

Energetic Materials and Plasma Technology 2

Explosives 2

Propellants 2

Pyrotechnics 1

Human Sciences 6

Human Performance Enhancement 1

Human Survivability, Protection & Stress Effects 2

Human-Factors Integration 1

Military Human Resources 4

Information & Signal Processing 14

Data & Information Management Technology 5

Digital Signal Processing Technology 4

Image/Pattern Processing Technology 6

Information and Data Fusion Technology 4

Modelling and Simulation Technology 3

Optical Signal Processing Technology 2

Optimisation & Decision Support Technology 2

Speech & Natural Language Processing Technology 2

Operating Environments 2

Acoustic Propagation in Air & Water 1

Meteorology 1

Photonic/Optical Materials & Device 3

Display Materials & Devices 2

IR/Visible/UV Detector Materials & Devices 1

Lasers (All Types) 1

Non-Laser Devices 1

Optical Materials & Devices 2

Transparent Materials 1

Signature Related Materials 6

Acoustic & Vibration Absorbing Materials 4

Radar Absorbing Materials & Coatings 3

Structural Materials 24

Ceramics, Ceramic Matrix Composite and Glass 2

Corrosion and Wear Control Technology 3

Forming 10

Joining Technology 4

Life Extension of Structural Materials 2

Materials Removal 2

Metals and Metal Matrix Composite 13

Polymers and Polymer Matrix Composite 3

Smart/Functional Materials for Structural Uses 1

Structural Mechanics 7

Surface Protection Technologies 5

AS 9100 QMS 58

Academia / Cluster / Association 1

Aerospace 66

Aerospace Materials 20

Aerospace Power Plants and Related Equipments 7

Aerospace Sensors 8

Air Traffic Control 2

Aircraft Construction, Assembly and Sub-assembly 9

Aircraft Engines 8

Airport Equipments and Services 2

Cabin and Seat Layouts 3

Cargo and Logistics 5

Maintenance Repair and Operations (MRO) 12

Onboard Equipment Systems 4

Production Equipment and Software 8

Unmanned Vehicle Aircraft (UAV, Drone) 20

Aviation (ATA 100 Chapters) 49

(Airborne) Auxiliary Power Unit (APU) 1

Accessory Gear Box (Engine Driven) 1

Air Conditioning 2

Auto Flight 2

Bleed Air 1

Cabin Systems 4

Communication 7

Electrical - Electronic Panels Components 5

Electrical Power 4

Electrical Power Multiplexing 1

Electronic Warfare System 2

Engine 4

Engine - Fuel and Control 1

Engine Controls 3

Engine Indicating 1

Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3

Equipment /Furnishings 2

Fire Protection 3

Flight Controls 3

Folding Blades/Pylon 1

Fuel 1

Fuselage 3

Hydraulic Power 1

Ice And Rain Protection 2

In-Flight Fuel Dispensing 1

Indicating / Recording System 1

Inert Gas System 1

Information Systems 1

Integrated Modular Avionics 4

Landing Gear 4

Lights 1

Main Rotor Drive(S) 3

Main Rotor(S) 4

Missiles, Drones, and Telemetry 8

Multisystem 1

Nacelles/Pylons 2

Navigation 4

Oil 1

Onboard Maintenance Systems 1

Oxygen 1

Pneumatic 2

Power Plant 3

Rotors Flight Control 2

Stabilizers 3

Standard Practices And Structures - General 1

Surveillance 4

Tail Rotor 3

Tail Rotor Drive 2

Vacuum 1

Weapon System 3

Wings 1

Defence 22

Aerial Systems 11

Ammunition Technology 7

Ground Systems 14

Naval Systems 8

Defense Products 59

Battlespace Information 6

Command & Control 1

Digitization of the Battlespace 1

ISTAR (Intelligence, Surveillance, Target Acquisit 3

Information Warfare 1

Military Intelligence 2

Business Processes 8

Benchmarking & Best Practice 1

Business Process Simulation 1

Concepts & Product Definition 1

Procurement & Contracting Processes 3

Product Supportability 2

Research & Technology Management 3

Whole Life Cycle Improvement 1

Defence Analysis 2

Military Doctrine Analysis 1

Platform and System Concept Studies 1

Tactical Develop. and Supp. to Operation/Training 1

Defence Policy and Functions - Support 5

Equipment Disposal & Enviromental Protection 1

IS (International Security) 2

Logistics 2

Equipped Personnel 3

Equipped Men 1

Training & Education 2

Installations 6

Battlefield Engineering 2

Fortifications/Defences 3

Ground Stations 2

T&E Facilities (Test and Evaluation Facilities) 1

Platforms 36

Combat Aircraft 8

Commercial Aircraft 4

Communications Satellites 6

Drone 13

Fighting Land Vehicles 10

Fighting Sea Surface Platforms 2

Helicopters 10

Lighter-than-Air Platforms 2

Logistic, Command and Surveillance Land Vehicles 9

Logistic, Support and Surveillance Aircraft 5

Other Satellites 3

Space Launchers 3

Surveillance and Navigation Satellites 5

Undersea Platforms 1

Unmanned Land, Sea, Air Vehicles 16

Weapons 18

Directed Energy Weapons 5

Gun Systems - Hand Held 10

Gun Systems - Platform Mounted 11

Mines - Land 3

Mines - Sea 3

Missiles - Anti Air 8

Missiles - Anti Ground (Land) 5

Missiles - Anti Surface (Sea) 7

Non-Lethal Weapons 2

Torpedoes - Anti Submarine 4

Torpedoes - Anti Surface 3

Distributor 27

Education and Training 20

Events Organizer 1

Expert 10

Industry 4.0 23

3D Printing 4

Augmented Reality 1

Autonomous Robots 1

Big Data and Analytics 4

Cybersecurity 9

Industrial Internet of Things (IIoT) 8

Simulation 3

The Cloud Computing 3

Maintenance & Repair 14

Manufacturer 125

Media 32

Service Provider 136

Legal 85

Service Providers 12

Space 17

Supplier 34

Unmanned Vehicles & Platforms 26

Command and Control Subsystem 1

Data Display and Controls 1

Electrical Subsystem 1

Fire Control 1

I. Autonomous Surface Vehicles 2

I. Unmanned Aerial Systems 1

I. Unmanned Aerial Vehicles 2

I. Unmanned Ground Vehicles 1

I. Unmanned Maritime System 1

I. Unmanned Maritime Vehicle 1

Mission Computer, Processing 1

Navigation, Guidance 3

Propulsion 2

Transport Vehicles 2

Vehicle Command and Control 2

+390525401281

Write a review

BEAMIT SPA

Strada Prinzera, 17 Fornovo di Taro (PR) 43045, Italy

BEAMIT Group is a European leading company in advanced manufacturing, that includes Additive Manufacturing and Post processes, as a unique organization with an integral internal value chain.

+390525401281

+34666737318

Write a review

DMD Solutions

in Reliability and Maintainability of Systems Safety systems Design for Improved Reliability & Maintainability Service Provider Supplier

Carrer Àlaba 140 Barcelona, Spain, 5è 3era 08018, Spain

DMD Solutions provides engineering services in the fields of aerospace design & certification with a focus on Reliability, Availability, Maintainability, and Safety in the aerospace industry.

+34666737318

+919825107090

Write a review

Turbo Cast (India) Pvt. Ltd.

in Metals and Metal Matrix Composite Forming Optical Materials & Devices Display Materials & Devices Medical Products and Materials

35 / Silver Sand, Opp - Big Bazaar, 150 Feet Ring Road, Rajkot 360 001, India

Turbo Cast (India) Pvt. Ltd. is India's First Indigenous Investment Casting Foundry, started in 2015, especially for Aerospace, Defense, Medical & Aluminum Alloy, Accredited for AS9100D & Nadcap (NDT & Welding) certification.

+919825107090

+381653210011

Write a review

EDePro

EDePro, Kružni Put, Belgrade, Serbia

EDePro is engaged in the R&D production, trade in the new, and modernization of the existing munitions and defense equipment, as well as in the application of high-tech solutions in hailstorm defense, as well as in other civil applications.

+381653210011

+5493814186821

PAPIZTURBINE

in Gas Turbines Rocket Engines and Ramjets Electrical Propulsion - rotary & linear Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan Manufacturer

Santa fe 670st Cruz Alta 2189, Argentina

We design and manufacture jet engines, rocket engines, and special designs like UAV's, small jets, and propulsion

+5493814186821

+902163943331

GÜR Metal Investment Casting

Orhanlı, Gür Metal Hassas Döküm San. ve Tic. A.Ş., Dosthane Sokak, Tuzla/İstanbul, Turkey

Gür Metal is Turkey's leading Investment Casting company with a strong track record in steel, stainless steel and aluminum cast parts for the aerospace, automotive, healthcare, valves and pumps, textile and general machinery industries.

+902163943331

Listings in Reliability and Maintainability of Systems, Fluid Mechanics-Phenomenological and Experimental and Rocket Engines and Ramjets

Download our app to your mobile phone